Brand N/A Model CZH-T200 Qty 1 piece(s) per pack Color Black Material Aluminum alloy Specification Display screen: 1.1 inch LCD; Working power supply: BL-5C 3.7V 1000mAh lithium battery; Frequency range: 87~108MHz / 76~90MHz (selectable); Frequency stability: +/-10PPM; Frequency stepping: 100kHz; Transmission power: (Class 1 / 2 / 3 / 4) 0.01mW / 10mW / 100mW / 200mW; Distance: (Class 1 / 2 / 3 / 4) 10m / 100m / 300m / 500m; Working time: 16 hours / 10 hours / 8 hours / 6 hours; Charging time: About 5 hours; Charging voltage: 5V; Spurious / Harmonic radiation: =60dB Other Features Please install the antenna firstly then open the FM transmitter; Please avoid the gas or gas station high temperature or damp places. Packing List 1 x FM transmitter 1 x Antenna 1 x Audio cable (149cm) 1 x Microphone (116cm-cable) 1 x Battery 1 x Car charger adapter (12~24V) 1 x English user manual 1 x Back clip 1 x USB cable (80cm)
Brand N/A Model CZE-5C Qty 1 piece(s) per pack Color Silver Material Aluminum alloy Specification 1.7" LCD; Working voltage: DC 10~14V recommended to 12V; Working current: Other Features LCD display; Stepper is 100KHz adjust the frequency via "+" / "-" button; 3.5mm audio stereo jack; The back panel is DC 12V 5.5mm power port; Powered by DC 12V / 5A external charger adapter; Suggest to choose switching power supply such as laptop or LCD monitor power adapter the plug with magnet ring filtering will be the best; Note: Please connect the antenna first and then turn on or the transmitter will be burnt Packing List 1 x FM transmitter 1 x AC power charger adapter (100~240V / 143cm-cable) 1 x Audio cable (179cm) 1 x Telescopic antenna 1 x AC power cable (US plug / 66cm-cable)
Brand N/A Model CZE-05B Qty 1 piece(s) per pack Color Black + white Material Aluminum alloy Specification The front panel use LCD display; 100kHz stepper; To adjust the frequency by the +and - two buttons; 3.5mm stereo audio input jack; Back side with 5.5mm DC12V power input port; Power can be switched between 0.1W / 0.5W; Power switch: Press and hold the power switch button 3s when the LCD display L or H; By the button Upward symbol and Downward symbol to switch the transmitter power (L=0.1W / H=0.5W); After finishing power setting it will go into frequency range set mode and there will be a set of data on the LCD which is high-end of the operating frequency; For example if you want to set the operating frequency from 90MHz~100MHz you could adjust the data to 100MHz by pressing the button of Upward symbol and Downward symbol; Press DC power switch button then you can set the low frequency to 90MHz in the same way. Other Features Please install antenna firstly then plug the power adapter; Display screen: 1.7 inch; Working voltage: DC 10~14V (Recommend 12V); Working current: Packing List 1 x Transmitter 1 x 100~240V power adapter cable (144cm) 1 x 2-flat-pin plug power cable (68cm) 1 x Audio cable (178cm) 1 x Rubber antenna 1 x English user manual
Brand CZE Model CZE-7C Quantity 1 piece(s) Color Black Screen Size N/A Screen Display N/A Fuction FM transmitter FM Frequency Range 87MHz~108MHz MHz FM Transmit Distance N/A m EQ Mode N/A SNR >= 70 dB Bit Rate N/A Kbps Interface N/A Built-in Memory N/A External Memory N/A Expansion Card Max. Capacity N/A Input Voltage 12 V Working Currency Remote Control No Other Features Phase Lock Loop (PLL) System; Easily choose your frequency LCD and buttons; Working voltage: 12V; Working current: =35 dB; Input level: 15dB (Adjustable); Frequency modulation: +/- 75KHz; SNR: >=70dB; Antenna impedance: 50 ohm Packing List 1 x FM stereo PLL transmitter broadcast
This FM transmitter features wide transmission clear sound easy operation and can be used in school community industry and mining tourist attractions etc; uses ROHM BH1415 chip PLL for Hi-Fi stable signal transmission; ensures clear stereo sound good shielding heat sinking; easy to install and use with blue backlit LCD screen and connector marks.